Inquiry
Sitemap
Top Page
Electrostatic Discharge (ESD) can damage a sensitive electronic component, resulting in failures, reduced reliability and increased rework costs, or latent component failures with the end user.
Central can help. With years of experience dealing with ESD related problems, and a broad range of ESD solutions such as ESD protective packaging, ESD protective eqipment used in the manufacture of electronics, and coating of customized parts using a pattented & unique conductive polymer (ST-Poly), Central is your ideal choice.
ESD Protective Packaging
Central is a leading supplier of ESD safe, and budget friendly items such as trays, electronics parts & custom applications, coated with a unique, pattented conductive polymer, "ST-Poly".
Injection Molded Trays
Precision molded in high quality budget friendly plastic and plated with ST-Poly for a clean, transparent, ESD protected, low cost alternative to carbon filled trays.
ST-Poly Molded Trays and Containers.
Not only is ST-Poly widely used for vacuum formed trays, but is is also ideal for end users looking for a lower cost, cleaner, molded ESD tray alternative to the current solutions of loading the plastic with carbon or stainless steel fibers.
ST-Poly molded trays such as the HGA tray and solder ball holders below, can be molded in low cost, low filler plastics such as polycarbonate. These are then "plated" in our ST-Poly conductive polymer, giving you a low cost, static-dissipative, rewashable, solvent-resistant tray.
We can also take molded trays of any size or shape and plate them with ST-Poly for you.
In fact, we can take almost any plastic component and coat it with ST-Poly, like the Shipping Comb shown on the right.
Furthermore the plating of molded components is an excellent cost-saving way to avoid using contaminating expensive fillers such as carbon and stainless steel.
ST-APET Thermoformed Trays
Transparent, Clean (low LPC, IC, and Outgas)Surface resistance = 10E6 Make ST-Poly APET your No.1 choice for antistatic packaging
ST-Poly Molded Trays and Containers
Transparent,Clean (low LPC, IC, and Outgas)
Surface resistance = 10E6
Make ST-Poly APET your No.1 choice for antistatic packaging
ST-Poly Molded Trays and Containers.
ST-Poly APET is a static dissipative (10^5) thermoformable sheet made by our partner Achilles in Japan.
ST-Poly provides various Industries affected by ESD problems with a clean, low-cost, re-washable, transparent ESD packaging solution. ST-Poly contains no carbon, no metal, and no corrosive agents. It is very clean and can be used in the toughest cleanrooms AND be rewashed in either ultrasonic DI or IPA without any degradation or contamination.
ST-Poly APET trays are the low cost, clean and transparent recyclable alternatives to expensive, contaminating, non-transparent vacuum formed trays. Never has a truly static dissipative material been transparent to the point of barcode scannability until ST-Poly.
 |
Thickness | 0.5mm, 0.65mm, 0.9mm, 1.2mm |
| Width | 610mm and 640mm. | |
| Application (example) | (Spindle motor, HSA, HDD) for HDD, integrated circuit chip, FPC, LCD Module, medical device, and flat panel |
Summary of technical data for ST-Poly APET
| Thickness | 0.5 mm |
| Specific gravity | 1.34g / cm sq |
| Surface resistance | 1 x 10E5 Ohms per square |
| Surface resistance after elongation | 100% 3x 10E5 Ohms per square |
| 150% 1 x 10E6 | |
| 200% 1 x 10E7 | |
| Surface resistance after abrasion | 5 x 10E5 Ohms per square |
| Light transmission ratio | 60 (Spectral photometer 550nm) % |
| Softening point | 80 Degrees centigrade |
| Tensile elasticity | 18,800 Kg/cm sq |
| Yield strength | 470 Kg/cm sq |
| Break Strength | 560 Kg/cm sq |
| Elongation | 680 % |
| Impact strength | 970 N |
| Absorptive capacity | 0.4 % |
ESD and Non-ESD shipping tubes.
Complete range of high quality shipping tubes (packaging tubes) for electronic components using ESD and non-ESD materials.
iProfile Shipping Tubes
iProfile Shipping Tubes
Packaging Tubes for Electronic Components
We have a complete range of high quality shipping tubes for electronic components.
No other manufacturer can offer the same degree of expertise and knowledge in the dedicated design and production of this activity. This enables us to guarantee fast deliveries and highly competitive prices.
Applications include relays, transformers, connectors, integrated circuits, as well as small light emitting devices such as LCD's, LED's, HDD components, etc.
We offer those tubes in a wide variety of materials, which include PVC, conductive PVC, PS, ABS and PETG.
Together with the tubes, all kinds of stoppers, plugs and pins can be supplied in the material and colours requested by the customer.
Anti-static treatments are available either through coating or as an additive to the material compounds before extrusion.
Custom printing also available.
